Backup (and Restore) Your LuvLink Frame
You can back up everything on your Digital Photo Frame — photos, videos, and connections — to a micro SD card. As a bonus, the SD card also frees up space on the frame so you can keep adding more photos and videos. Here's what you need and how to do it.
SD card requirements
Before you start, make sure your SD card meets both of these requirements:
- Maximum storage of 32GB or less
- Formatted as FAT32 (SD cards of this size are usually FAT32 by default)
If you need to format your SD card to FAT32 first, see How to Format an SD Card.
How to back up to an SD card
- Insert the micro SD card into the slot on the frame.
- Go to Settings and tap the Backup and restore submenu.
- Tap Backup frame to external storage (e.g. microSD card).
The frame will start backing up all your photos and connections. This might take a minute or so, depending on how many photos are stored on the frame.
Automatic backup from an SD card
In the Backup and restore settings, you can turn on automatic backup — as long as a compatible micro SD card is inserted in the frame.
When this is on, newly received photos and videos will be backed up automatically within 30 hours.
Restore from a backup
Before you restore, check that your backup is up to date.
To restore from a backup, you must reset the frame first.
Note: You cannot restore to a new Frameo frame and keep the old frame running at the same time.
If you run into any trouble, our support team is happy to help — just contact us.